How to setup your NorCal OAUG Clock

To turn it on:

1) Slowly slide the clock out of the black and silver holder (See picture below)

2) Remove clear tab from the battery compartment.  The clock should turn on.

How to program the time:

1) When you first turn it on, press the clock button

2) Use the up and down arrow buttons to choose 12-hour display (normal time) or 24-hour display (military time).  When finished, press set.

3) Now choose the hour with the up and down arrows.  Press set when finished.

4) Now choose the minute.  Press set when finished.

5) Now choose the year.  Press set when finished.

6) Now choose the month.  Press set when finished.

7) Choose the day.  Press set when finished.

8) Now you should be back to the screen where you choose the display option.  If you are done setting the time, push the clock button until the normal screen reappears.

How to program the alarm:

1) Push the alarm button (the one with a bell on it)  Then push set.

2) Use the up and down arrows to change the hour.  When finished press set.  Then, use the same buttons to set the time.  Press set when finished.

3)Now, with the arrow buttons, choose which song you would like as your alarm.  When finished, press set.  The alarm is now turned on.

To turn the alarm off and on:

1) Press the alarm button.  Press set 5 times (or until there is no time showing).  Then press the clock button until it returns to the normal screen. 

2) To turn it back on, press the alarm button.  Press set 4 times and then press the alarm button.  The alarm is now set.

To use the snooze function:

1) When the alarm is turned on, press the up arrow key to turn the snooze function on.  Press it again to turn it off.  With the snooze function on, when you press a key to stop, it will ring again in 3 minutes.  It will ring overall 4 times and then it will stop.

How to change from Celsius to Fahrenheit:

1) On the normal screen, press the set button to change between Celsius and Fahrenheit.